| Warranty: | One Year After Delivery |
|---|---|
| Oil or Not: | Oil Free |
| Structure: | Reciprocating Vacuum Pump |
| Exhauster Method: | Positive Displacement Pump |
| Vacuum Degree: | High Vacuum |
| Work Function: | Mainsuction Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 2SK Pump description:
2SK series two-stage water ring vacuum pump and 2SK- P1 series two-stage water ring vacuum pump---air injection pump unit are vacuum pumps and vacuum unit with high degree of vacuum, high evacuation speed in high vacuum intervals, compact construction, reliable application, and easy assembly and disassembly which developed according with stipulations of Patterns and Basic Parameter of JB/TQ354-84(Water Ring Vacuum Pump and Water Ring Air Compressor).
This unit consists of one-stage air injection pump and two-stage water ring vacuum pump which can be used separately if client required.
This two-stage water ring vacuum pump or unit is applicable for pumping air and other non-corrosive gas which is insoluble in water and without containing solid particles so as to acquire high vacuum in sealed vessel.
Working Principle:
The working principle of two-stage water ring vacuum pump is illustrated in the following Figure. When the eccentrically-assembled impellers(5) in the pump body (3) rotate, water is thrown off outwards due to the centrifugal force .This will form a rotating water ring(6) between the inside surface of pump body and the impeller. Then the inside surface of water ring will contact impeller hub. When the impeller hub rotates clockwise, the inside surface of the water ring breaks away gradually from the hub during the first half turn and the cavity between two adjacent impellers grow gradually thus the pumped gas is drawn into the cavity through crescent suction hole(7) via pump inlet air pipe(4); during the second half turn, the inside surface of water ring approaches the impeller hub gradually and the cavity between two adjacent impellers shrink gradually with the gas compressed and the pressure of which keep decreasing and air got expelled. When the internal pressure override the pressure of the external pressure, the gas inside the vessel is evacuated gradually ,so it will acquire vacuum.
The structural drawings of two-stage water ring vacuum pump with capacity over 1.5m3/min is illustrated in the figure 2, the longer impeller(17) and the shorter impeller(16) are fixed to the shaft(2) with pins, and between the two impellers, it is fixed by shaft sleeve(20) and locked with round nut so it forms rotor. The two impellers eccentrically installed inside the pump body and supported by two single row radial ball bearings. The rotor is connected to motor shaft with coupling(18) and rotates together with the motor. Longer impeller(17),longer pump body(9) and the suction part forms high vacuum degree; shorter pump body(5),shorter impeller(16)and the discharge part forms low vacuum degree. The air outlet of high degree vacuum segment and the suction inlet of low degree vacuum segment are connected into dual-stage tandem with communicating pipe. The two segments are separated by intermediate wall (A)(7)and intermediate wall(B)(6) and the intermediate wall(B) has intake port. The 2SK series two-stage pumps are mechanically sealed at both ends.
There is a water inlet hole in the high degree vacuum segment through which the make-up water is filled into the longer pump body, while the make-up water for low degree vacuum segment is discharged from the high degree vacuum. (The make-up water for the low degree vacuum of 2SK-12A,2SK-20A and 2SK-30A are also partly supplied from the water supply pipe but it need to be regulated through valves.) The high and low degree vacuum segments are secured together with draw-in bolt. The air injection pump consists of inlet air pipe, jet nozzle, air valve body and diffuser.
Technical specification of 2SK series two-stage water ring vacuum pumps:
Technical specification of 2SK- P1 series two-stage water ring vacuum pump ---air injection vacuum pump unit:
Packaging and shipping:
Packaging:
Standard export polywooden cases.
Customized packaging can be available.
| Shipping method | Note |
| Express | Door to door, very convenient, don't need customs clearance or pick-up. |
| By air | Airport to airport, you need to do the customs clearance and pick up the goods at your local airport. |
| By sea | Port to port and you need to do the customs clearance and pick-up the goods at your local port. |
1. Q: Are you a manufacturer or trading company?
A: We are manufacturer of vacuum pumps and water pumps in China since 1986.
2. Q: What's your MOQ?
A: One set is ok.
3. Q: What's your payments terms?
A: T/T, Western Union......
4. Q: What certificates do you have?
A: CE, ISO 9001 ....
5. Q: How about the warranty?
A: 12 months warranty since delivery.
6. Q: What's the delivery time?
A: For different models,different motor specs and different material,delivery time is different,please double confirm with our sales team.
7. Q: Can you do OEM brand?
A: Yes, welcome.
8. Q: Quality reliable?
A: We have whole testing system controlled by micro-machine,testing performance curve can be sent to clients before arrange delivery.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}